Dock Lifts and Ergonomic Tables

L O A D E X E L E V A T I N G D O C K S

LOADEX Elevating Docks are the leading choice of knowledgeable buyers seeking to service wide varieties of trailer heights. From critically placed stress relieving bearings and high capacity cam follower rollers to comprehensive safety features, the benefits of LOADEX lift products are clear. Offered at competitive prices and backed by a solid 1/5/10 year warranty, more companies are choosing LOADEX everyday.

Superior Construction and Design

Standard 18" non-slip checker plate lip with piano hinge and corrosion resistant lifting chains
Non-slip checker plate platform supported by high strength tubular structural steel under structure and complete with beveled toe guards and back and yellow safety striping
3/4" think solid steel scissor legs
Stress relieving spherical bearings on cylinder bottoms and center studs of scissor legs
High quality hydraulic cylinders and rams feature maintenance free Oilite bushings at rod ends, self-aligning spherical bearings on cylinder bottoms, and velocity fuses standard
High dynamic capacity cam follower rollers on scissor leg bottoms provide superior performance and durability
Integral maintenance stand
Two 42" high hand rails with choice of fixed or stake pocket mounting, 4" high kickplate and safety chains across open ends
User friendly controls consist of Nema 4 push button station on 15ft of Type SJO coil cord, Nema 12 dust and oil tight enclosure, and a 24 volt secondary control circuit
Heavy Duty Power Unit features submerged gear pump assembly, single valve block manifold complete with pressure relief check valve and 24 volt poppet valve
Extra large 15 gallon sealed oil reservoir complete with oil

Options

Hydraulic Roll Off Stop - Hydraulically activated curb which helps prevent a lift truck from rolling off the end of the table
Perimeter Safety Stop - Tubular bar type construction which immediately stops travel of lift table through an electrical limit switch if any obstruction contacts the bar
Roller Curtain - Extra Heavy vinyl coated nylon curtain available on any or all sides for additional safety
Special Lips - Lips may be constructed from steel or aluminum in many sizes and may be spring assisted for heavier lips, or with lip post and roller design for automatic extension and retraction
Additional Controls - In motion lights and beeper, upper travel limits, flanged fused disconnects, quick disconnect, emergency stops, keyed ON/OFF switches are available options
Special sizes and capacities available on request

MODEL ED-5000

Capacities - 4,000lb 5,000lb 6,000lb 8,000lb
Platform Size Range - 48" x 84" to 96" x 144"

MODEL ED-6000

Capacities - 10,000lb and 12,000lb
Platform Size Range - 72" x 96" to 96" x 192"

MODEL ED-7000

Capacities - 15,000lb and 20,000lb
Platform Size Range - 72" x 96" to 96" x 192"

L O A D E X L T S E R I E S

LOADEX LT Series in-plant are ergonomically designed to ease work efforts anywhere job functions require:

Reaching
Lifting
Turning
Bending
Raising
Twisting
Stooping
Squatting
Lowering
Pushing
Pulling
Positioning of the worker, the product or material for an assembly, packing or other similar operations.

Features Include:

3/4" thick high tensile steel scissor legs
Smooth or checker plate deck surface
Stress relieving spherical bearings at leg centers
Maintenance free Oilite bushings
High dynamic capacity cam follower rollers
Integral maintenance stand
Hard chrome plated & polished cylinder rods with internal stops
Velocity fuses on all cylinders to prevent collapse in the event of hose vandalism or failure

LT SERIES 2000

Features the same sizes, options and standard equipment as the LT Series 1000 with the addition of greater travel (up to 60") as a result of the double scissor configuration.

Options include:

n-motion warning beeper
In-motion amber light
Upper travel limit
Handrails
Lips and ramps
Roller ball or conveyor roller transfer tops
Safety roller curtains
Perimeter safety stop (any or all sides)
Keyed On/Off
Emergency STOP button
Foot treadle switch
Many others

LT SERIES 1000

Platform sizes - 24" x 48" to 72" x 84"*
Travel - from 34" to 48"
Lowered heights from 6-3/4" - 8"
Speeds from 6ft/min to 16ft/min
Many control options

PL SERIES LO-BOX LIFT

Floor mounted lift designed for pallet truck loading with a ramp.

Features include:

Remote mounted power unit and control panel
36" travel
50" w x 50" l deck
4,000lb capacity

TP SERIES TILT PLATFORMS

These floor or lift mounted tilters are designed for positioning pallets and containers of materials or parts for easy access in order to increase productivity.

Capacities - 2,000lb to 6,000lb
Platform widths - 24" - 60"
Platform lengths - 36" - 60"
Tilt angles - 30, 45, 60, 90 degrees

TT SERIES TURN TABLE

Heavy duty turn table tops are designed to be mounted on the top of LT Series decks. The heavy duty plate is supported by six maintenance free rollers with sealed bearings.

Capacities - 2,000lb & 4,000lb STD (Up to 10,000lb optional)
Table top widths - 24" - 72"
Table top lengths - 48" - 72"

R A I L L I F T S

The LOADEX RL Series lifts provide distinct advantages over traditional scissor lifts:

More vertical travel with smaller size decks. Full 60" travel with all models
Lowered heights from 3-1/2" - 5-1/2" depending on capacity
No pit requirements
Load stability is increased by the smoother and more consistent raising and lowering of the ramp. The lifts also offer full rated capacity side loading in fully raised position.
Self contained power unit
Superior speed to horsepower ratio
Lower maintenance requirements

The LOADEX RL Series lifts offer both standard and optional features found on more expensive traditional lifts:

60" Handrail on one side
42" Handrail on one side (optional on RS Models)
18" Hinged lip on one end (optional on RS Models)
30" Fixed ramp on one end (optional 24" ramp on RS Models)
Remote power pack (optional on all models)
Aluminum lips, ramps (optional on all models)
Portability option (RP Model)
Integral Maintenance struts (STD on all models)
Multiple horsepower options
Push button controls on 15' coil cord
Other control options

2500 LB MODEL RS

3-1/2" lowered height
36" travel (standard)
1.5hp TEFC motor
Self contained power unit
Smooth or checkered deck plate

Custom sizes available upon request.

4000 - 8000 LB MODEL RL

4-1/2" lowered height (for 4k and 6k capacities)
5-1/2" lowered height (for 8k capacity)
60" travel
2 hp TEFC motor
Self contained power unit
Smooth or checker deck plate
42" high handrail
18" long steel lip (1 end)
30" long stationary ramp

6000 LB PORTABLE MODEL RP

4-1/2" lowered height
54" travel (standard)
2hp TEFC motor
Fixed front, rear swivel wheels
42" high handrail, 60" high handrail
18"L x 66"W steel lip one end
30"L x 66"W steel ramp one end

Custom sizes available upon request.

10000 - 20000 LB DUAL RAIL MODEL RDL

4-1/2" lowered height
5hp TEFC motor for 10k capacity
7.5hp TEFC motor for 15k capacity
10hp TEFC motor for 20k capacity
Remote power unit
18"L x 66"W steel lip one end
30"L x 66"W steel ramp one end
Smooth or checker deck plate
(2) 60" high fixed closed handrails